General Dynamics F-16 Fighting Falcon

McDonnell Douglas F16-D Canopy Cover, open cockpit type (test fit cover)

McDonnell Douglas F16-D Canopy Cover, open cockpit type (test fit cover)

Product ID

Product name

Unit Price

close= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.
= Items that have expedited delivery.

Quantity Qty

Cart

Products:
Try Our New Product Filter
×

Only want to see some of our products?

Use the Product Filter Checkbox List to only see the products that interest you.

Section 1: Canopy/Cockpit/Fuselage Covers

8 Products, 16 Photos

F16-000

CANOPY COVER (C-Model, single seat models)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The General Dynamics F-16 Fighting Falcon Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

F16-001

CANOPY COVER (D-Model, dual seat models)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The General Dynamics F-16 Fighting Falcon Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-002

CANOPY COVER (C-MODEL, single seat models) "blackout" type

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The General Dynamics F-16 Fighting Falcon Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-003

CANOPY COVER (D-MODEL, dual seat models) "blackout" type

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The General Dynamics F-16 Fighting Falcon Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-010

CANOPY COVER, OPEN POSITION (C-Model, single seat models)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The General Dynamics F-16 Fighting Falcon Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

F16-011

CANOPY COVER, OPEN POSITION (D-Model, dual seat models)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The General Dynamics F-16 Fighting Falcon Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

F16-040

CANOPY/NOSE COVER (C-Model, single seat models), NSN: 1560-01-420-9453

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

The Canopy/Nose Cover combines a Canopy Cover and a Nose cover. The General Dynamics F-16 Fighting Falcon Canopy Cover is designed to enclose the windshield, all side windows, canopy roof, and extend forward to cover the nose. It is a one-piece cover. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

F16-041

CANOPY/NOSE COVER (D-Model, dual seat models)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Product Description................................................................................................................................

The Canopy/Nose Cover combines a Canopy Cover and a Nose cover. The General Dynamics F-16 Fighting Falcon Canopy Cover is designed to enclose the windshield, all side windows, canopy roof, and extend forward to cover the nose. It is a one-piece cover. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 2: Engine Covers

15 Products, 56 Photos

F16-110

INTAKE COVER, narrow mouth type

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

F16-111

INTAKE COVER, narrow mouth type, tri-ring style

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-112

INTAKE COVER w/forms pouch, narrow mouth type

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-113

INTAKE COVER w/forms pouch, wide mouth type

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-130

INTAKE COVER, wide mouth, block 30, 40 & 50

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-131

INTAKE COVER, wide mouth type, tri-ring style

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-132

INTAKE COVER, block 40/50, w/forms pouch

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-175

INTAKE/EXHAUST COVER SET, specify narrow or wide mouth type (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Tri-Fold Ring Engine Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder in many cases. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight Solution-Dyed Polyester which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

ALL-YEAR USE MATERIAL - Made with Solution dyed Polyester fabric, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

F16-177

INTAKE/EXHAUST COVER SET w/forms pouch, specify narrow or wide mouth type (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Tri-Fold Ring Engine Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder in many cases. To store the covers the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight Solution-Dyed Polyester which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.... read more

ALL-YEAR USE MATERIAL - Made with Solution dyed Polyester fabric, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-200

EXHAUST COVER, block 32 models, PW F100-220 engine

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

F16-202

EXHAUST COVER, block 52 models, F100/PW-229 engine

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-203

EXHAUST COVER, block 30 models, GE 110 engine

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-204

EXHAUST COVER, block 40 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-210

EXHAUST COVER, block 42 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-211

EXHAUST COVER, block 50 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item available in Red, Burgundy, Royal Blue, Navy Blue, Silver, Smoke, Forest Green, or Black. Standard is Red, but contact us if you want another color.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 3: Plugs & Protection

22 Products, 10 Photos

F16-100

INTAKE PLUG, narrow mouth, bi-fold type, NSN 1730-01-542-3476 "COVER SET,AIRCRAFT SHIPPING"

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

F16-101

INTAKE PLUG w/forms pouch, narrow mouth, bi-fold type

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-102

INTAKE PLUG, w/ forms pouch, narrow mouth

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-105

INTAKE PLUG, block 40 models, bi-fold type (wide mouth)

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-106

INTAKE PLUG w/forms pouch, block 40 models, bi-fold type (wide mouth)

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-107

INTAKE PLUG, block 50 models, bi-fold type (wide mouth)

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-120

INTAKE PLUG, wide mouth, bi-fold type

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-121

INTAKE PLUG w/forms pouch, wide mouth, bi-fold type

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-122

INTAKE PLUG, w/ forms pouch, wide mouth

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-151

PITOT COVER & AIR DATA PROBE COVER, heat resistant type (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item comes in red only.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Pitot Tube Covers, made of Naugahyde vinyl, are designed to cover the entire pitot assembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove before flight" streamer is attached to the cover. Heat Resistant Pitot Covers are designed to withstand more than 500 ° Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitot cover attached.... read more

Additional Information................................................................................................................................

Our heat resistant Pitot covers are lined with fireproof Nomex to prevent burn stains on the Pitot tube if the Pitot heat is activated while on the ground during maintenance procedures.  The Nomex will NOT prevent the Pitot cover from being damaged by the heat, which can be as high as 500 degrees F. (260 degrees C.), but it will prevent unsightly burn stains on the Pitot tube which cannot be removed.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-176

INTAKE/EXHAUST PLUG SET, specify narrow or wide mouth type (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake/Exhaust Plugs are custom fit for the intake and exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-178

INTAKE/EXHAUST PLUG SET w/forms pouch, specify narrow or wide mouth type (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Intake/Exhaust Plugs are custom fit for the intake and exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-201

EXHAUST PLUG, block 32 models, PW F100-220 engine

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-205

EXHAUST PLUG, block 30 models, GE 110 engine

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-206

EXHAUST PLUG, block 50 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-207

EXHAUST PLUG, block 52 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-208

EXHAUST PLUG, block 40 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-209

EXHAUST PLUG, FOLDING TYPE, specify model

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-212

EXHAUST PLUG, block 25 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-213

EXHAUST PLUG, block 42 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your General Dynamics F-16 Fighting Falcon exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-220

ECS INTAKE PLUG

Contact us for pricing

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your General Dynamics F-16 Fighting Falcon intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-700

RADOME & NOSE PITOT COVER

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item comes in red only.

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Pitot Tube Covers, made of Naugahyde vinyl, are designed to cover the entire pitot assembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove before flight" streamer is attached to the cover. Heat Resistant Pitot Covers are designed to withstand more than 500 ° Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitot cover attached.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 4: Wing/Tail/Empennage Covers

7 Products, 2 Photos

F16-300

WING COVERS (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-305

WING COVERS, padded for hail protection (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-310

HORIZONTAL STAB. COVERS (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire upper surface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure under each stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. Horizontal Stabilizer Covers are available for winter use or long-term all year use, and are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporates dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-320

HORIZONTAL STABILIZER COVERS, padded for maintenance protection (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire upper surface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure under each stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. Horizontal Stabilizer Covers are available for winter use or long-term all year use, and are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporates dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-325

PADDED FLAP COVER w/ Remove Before Flight Streamers

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item comes in red only.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-330

PADDED AILERON COVER w/ Remove Before Flight Streamers

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item comes in red only.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-605

370 gal. WING FUEL TANK PYLON COVER, with/without forms pouch

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Section 5: Heatshields & Sun Reflectors

2 Products, 6 Photos

F16-900

CANOPY HEATSHIELDS (A, C & N models), NSN: 1730-01-541-5772 (set of 2)

Contact us for pricing

Product Description................................................................................................................................

Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than 1/8" thick, the Reflector can fold up flat and store in a sleeve, yet is stiff enough when flat to stand up against the windshield using the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields are an excellent short-term remedy for cockpit overheating, but use the Cockpit Cover for more effective and practical long term protection.... read more

F16-901

CANOPY HEATSHIELD (B & D models)

Contact us for pricing

Product Description................................................................................................................................

Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than 1/8" thick, the Reflector can fold up flat and store in a sleeve, yet is stiff enough when flat to stand up against the windshield using the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields are an excellent short-term remedy for cockpit overheating, but use the Cockpit Cover for more effective and practical long term protection.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 6: Miscellaneous Products

19 Products, 26 Photos

F16-160

TOTAL AIR TEMP PROBE TAT COVER, NSN 1730-01-542-3477 "COVER,AIRCRAFT GROUND SERVICING" (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item comes in red only.

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-405

HUD ASSY COVER, block 40/50 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-410

LAUNCH RAIL COVERS (L29 launcher) (set of 4)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-420

LAUNCH RAIL COVERS (AIM 9 launcher) (set of 2)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-500

TIRE COVERS (smaller main tire size, 25.5" Diam.) (set of 3)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

F16-501

TIRE COVERS (smaller main tire size, 25.5" Diam. w/ chain-weight bottom hem) (set of 3)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-510

TIRE COVERS (larger main tire size, 27.75" Diam) (set of 3)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-511

TIRE COVERS (larger main tire size, 27.75" Diam w/ chain-weight bottom hem) (set of 3)

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-520

MAINTENANCE SEAT COVER, ACES II

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

F16-530

MAINTENANCE SEAT COVER, block 40, 50, 52 models

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-550

SEAT PAD, ACES II

Contact us for pricing

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-600

CARGO POD COVER

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

F16-601

SNIPER POD ATP-SE COVER, with foam/microfiber on window

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-610

300 gal. CENTERLINE FUEL TANK PYLON COVER, with/without forms pouch

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

F16-615

300 gal. CENTERLINE FUEL TANK FULLY ENCLOSED COVER, with/without forms pouch

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-620

370 gal. WING FUEL TANK FULLY ENCLOSED COVER, with/without forms pouch

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-622

600 gal. CENTERLINE FUEL TANK COVER, with/without forms pouch

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-650

LARGE COVERS STORAGE BAG

Contact us for pricing

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 7: Light Weight Products: Travel Covers and FlyAway Covers

3 Products, 3 Photos

F16-800

TRAVEL COVER, Light Weight Canopy Cover (single seat models)

Contact us for pricing

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Lightweight Travel Canopy Cover will cover the same area as our standard Canopy Cover, but the material used is very lightwieight and will fold up and store in a much smaller space. This cover is ideal for the airplane that is hangered full time and only needs a cover on rare occasions.... read more

Travel Covers are made with Silver Solution-Dyed Polyester fabric and only lined over the windshield to save weight. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-805

TRAVEL COVER, Light Weight Canopy Cover (dual seat models)

Contact us for pricing

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The General Dynamics F-16 Fighting Falcon Lightweight Travel Canopy Cover will cover the same area as our standard Canopy Cover, but the material used is very lightwieight and will fold up and store in a much smaller space. This cover is ideal for the airplane that is hangered full time and only needs a cover on rare occasions.... read more

Travel Covers are made with Silver Solution-Dyed Polyester fabric and only lined over the windshield to save weight. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

F16-810

TRAVEL COVER, Light Weight Travel Canopy/Nose Cover, NSN: 1560-01-420-9453

Contact us for pricing

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Can't find what you're looking for? We probably make it!
Our offices are currently closed for Our offices are closed for another 7.3 hours.. Send an email to bruce@aircraftcovers.com with information about your aircraft and the product you are looking for!

Product Images:

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

CLICK on any small image to enlarge it or CLICK on arrows to view next image