Pitts S2 Canopy Cover

Pitts S2 Canopy Cover

Product Images:

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

CLICK on any small image to enlarge it or CLICK on arrows to view next image

Product ID

Product name

Unit Price

close= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.
= Items that have expedited delivery.

Quantity Qty

Cart

Products:
Try Our New Product Filter
×

Only want to see some of our products?

Use the Product Filter Checkbox List to only see the products that interest you.

Section 1: Canopy/Cockpit/Fuselage Covers

5 Products , 9 Photos

PS2-000

CANOPY COVER (BELLY STRAPS, BUBBLE CANOPY MODELS)

$555.00

 

Product Options & Information..............................................................................................................

  • Some installation parts are required for this item, usually small metal snaps.
  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • This item is for a rare aircraft. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Pitts S2 Canopy Cover is designed to enclose the windshield, all side windows and canopy roof. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

Each Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers.... read more

Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra lightweight material available for fitted hangar dust covers.... read more

PS2-001

CANOPY COVER, S-1-11B, "Racer" style canopy

$370.00

 

Product Options & Information..............................................................................................................

  • Some installation parts are required for this item, usually small metal snaps.
  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Pitts S2 Canopy Cover is designed to enclose the windshield, all side windows and canopy roof. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

Each Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers.... read more

Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra lightweight material available for fitted hangar dust covers.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

PS2-010

CANOPY COVER (BELLY STRAPS, REAR BUBBLE, FORWARD HOLE COVERED)

$370.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Pitts S2 Canopy Cover is designed to enclose the windshield, all side windows and canopy roof. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

Each Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers.... read more

Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra lightweight material available for fitted hangar dust covers.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

PS2-015

CANOPY COVER (BELLY STRAPS, REAR BUBBLE, FORWARD WINDSHIELD)

$370.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Pitts S2 Canopy Cover is designed to enclose the windshield, all side windows and canopy roof. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

Each Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers.... read more

Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra lightweight material available for fitted hangar dust covers.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

PS2-150

FUSELAGE COVER (engine, canopy, tailboom)

$1,595.00

 

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Section 2: Engine/Prop Covers

4 Products , 2 Photos

PS2-110

ENGINE COVER

$345.00

 

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Engine Covers will cinch around or behind the spinner, cover the entire engine cowl area including the engine air cooling and induction air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling. The Engine Cover is attached with a belly strap aft of the firewall, and can Velcro to the Canopy Cover. Engine Covers are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. An Insulated version of the engine cover can be made with a thicker, quilted, and water-repellent material. The Insulated Engine Cover works well in cold climates to help with engine preheating.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

PS2-115

INSULATED ENGINE COVER

$470.00

 

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Pitts S2 Insulated Engine Cover is made with a thicker, quilted, water-repellent, and breathable material that is insulated on the inside. The Insulated Engine Cover works well in cold climates to help with engine preheating. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air cooling and induction air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling. The Insulated Engine Cover is attached with a belly strap aft of the firewall, and can Velcro to the Canopy Cover if desired.... read more

PS2-120

PROPELLOR/SPINNER COVER, 2 Blade

$255.00

 

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Pitts S2 Propeller Cover is a one-piece design that form fits to the blades and spinner. The prop cover slips over the blades and spinner and is attached by a plastic all-weather zipper on the bottom of the blades. Propeller covers can be made for multiple numbers of blades, and for wooden, composite or metal props. The Propeller Cover is normally made from Acrylic Sunbrella or Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Insulated Propeller Covers works well in cold climates to help with engine preheating. These insulated versions are made with a thicker, quilted, water-repellent, and breathable material.... read more

PS2-125

INSULATED PROPELLOR/SPINNER COVER, 2 Blade

$385.00

 

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Pitts S2 Propeller Cover is a one-piece design that form fits to the blades and spinner. The prop cover slips over the blades and spinner and is attached by a plastic all-weather zipper on the bottom of the blades. Propeller covers can be made for multiple numbers of blades, and for wooden, composite or metal props. The Propeller Cover is normally made from Acrylic Sunbrella or Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Insulated Propeller Covers works well in cold climates to help with engine preheating. These insulated versions are made with a thicker, quilted, water-repellent, and breathable material.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Section 3: Plugs & Protection

2 Products , 4 Photos

PS2-100

ENGINE INLET PLUGS (set of 2)

$145.00

 

Product Options & Information..............................................................................................................

  • This item comes in red only.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Engine Inlet Plugs are custom fit for your Pitts S2 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have warning flags that are visible from the cockpit or 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs..... read more

PS2-240

WINGTIP & HORIZ STAB PADS (set of 6)

$695.00

 

Product Options & Information..............................................................................................................

  • This item comes in red only.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Designed to prevent damage to the aircraft in crowded hangars, these products are made of bright red Naugahyde and thickly padded with a sandwich of closed cell foam.

Section 4: Wing/Tail/Empennage Covers

6 Products , 6 Photos

PS2-210

UPPER WING COVER, WINTER USE

$520.00

 

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The Pitts S2 Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

PS2-215

UPPER WING COVER, ALL YEAR USE

$675.00

 

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Pitts S2 Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

PS2-220

LOWER WING COVERS, WINTER USE (set of 2)

$555.00

 

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The Pitts S2 Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

PS2-225

LOWER WING COVERS, ALL YEAR USE (set of 2)

$720.00

 

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The Pitts S2 Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

PS2-300

HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2)

$220.00

 

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire upper surface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure under each stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate for static wicks. Horizontal Stabilizer Covers for winter use or long-term all year use are usually available, and are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporates dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

PS2-305

HORIZONTAL STABILIZER COVERS, ALL YEAR USE (set of 2)

$315.00

 

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire upper surface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure under each stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate for static wicks. Horizontal Stabilizer Covers for winter use or long-term all year use are usually available, and are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporates dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

Section 6: Miscellaneous Products

2 Products , 0 Photos

PS2-160

LANDING GEAR COVERS (set of 2)

$320.00

 

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

PS2-201

WHEELPANT COVERS (set of 2)

$135.00

 

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Wheel or Wheelpant Covers are designed to protect the wheelpants, or the wheel and tires, from sun damage and damage from the tow bar when moving the airplane.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Section 7: Light Weight Products: Travel Covers and FlyAway Covers

2 Products , 0 Photos

PS2-800

DUST COVER

$800.00

 

Product Options & Information..............................................................................................................

  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

PS2-805

TRAVEL COVER (Bubble Canopy Models), Light Weight Travel Canopy Cover

$455.00

 

Product Options & Information..............................................................................................................

  • Some installation parts are required for this item, usually small metal snaps.
  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • This item is for a rare aircraft. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Lightweight Travel Canopy Cover will cover the same area as our standard Canopy Cover, but the material used is very lightweight and will fold up and store in a much smaller space. This cover is ideal for the airplane that is stored in a hangar full-time and only needs a cover on rare occasions.... read more

NOTE: To preserve their light weight, Travel Covers have a soft lining in selected areas only.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Can't find what you're looking for? We probably make it!
Call us at (408)738-3959 or toll-free at (800)777-6405 (U.S. & Canada) Or use our online contact form here.