Questions? Our offices are closed for the weekend.Toll-free at (800)777-6405 (U.S. and Canada) or (408)738-3959 (Click Here To Email Us)
The Original and World's Finest Aircraft Covers for Airplanes, Jets, Helicopters, Gliders and QEC Off-link Jet Engines
C-130 Cockpit Cover (Windshield/Flight Deck)
Oshkosh Air Show Special!
Celebrate AirVenture 2019 and get 10% off your order. (Offer expires 8/4/19)
close= Bruce's Comments, Photos, Info & More.= Product Photos, Etc.= Items that have expedited delivery.
Only want to see some of our products?
Use the Product Filter Checkbox List to
only see the products that interest you.
COCKPIT/NOSE COVER (Windshield, Flight Deck, Nose)
Contact us for pricing
The Lockheed C-130 Hercules Cockpit/Nose Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more
The Cockpit/Nose Cover is designed to cover the windshield and side windows of the cockpit. Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. The windshield cover comes with a duffle bag. The N-number can be imprinted onto the cover for an extra charge. The windshield cover is trimmed in the colors of the aircraft.... read more
WINDSHIELD/FLIGHT DECK AREA COVER
WINDSHIELD/FLIGHT DECK AREA "BLACKOUT" COVER
Sorry, no photos at this time.
Check out the photo gallery or contact Bruce about this product.
ON-WING ENGINE & PROP COVERS (set of 8)
PROP BLADE COVER, padded
The Lockheed C-130 Hercules Propeller Cover is a one-piece design that form fits to the blades and spinner. The prop cover slips over the blades and spinner and is attached by a plastic all-weather zipper on the bottom of the blades. Propeller covers can be made for multiple numbers of blades, and for wooden, composite or metal props. The Propeller Cover is normally made from Acrylic Sunbrella or Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Insulated Propeller Covers works well in cold climates to help with engine preheating. These insulated versions are made with a thicker, quilted, water-repellent, and breathable material.... read more
PROPELLOR MAINTENANCE STAND COVER
PROPELLOR TEST UNIT COVER
MAINTENANCE STORAGE ENGINE, EXHAUST TURBINE, PROP/SPINNER COVER SET (QEC) (set of 3)
MAINTENANCE STORAGE ENGINE, EXHAUST TURBINE COVER SET, no prop (QEC)
PROPELLOR COVER, EACH (specify with or without spinner)
ATM COOLING INLET PLUG (forward and above left main gear), NSN 1730-01-530-6756, "SHIELD,AIRCRAFT GROUND SERVICING"
Engine Inlet Plugs are custom fit for your Lockheed C-130 Hercules intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have warning flags that are visible from the cockpit or 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs..... read more
GTC TAILPIPE EXHAUST PLUG (forward of main gear, left side)
Engine Exhaust Plugs are custom fit for your Lockheed C-130 Hercules exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more
FLIGHT DECK A/C INLET PLUG (on right side, below cockpit area)
FLIGHT DECK A/C INLET/EXHAUST PLUG SETS: H, J, T, P & U-models (on right side, below cockpit area), NSN 1730-01-530-6757, "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2)
FLIGHT DECK A/C INLET/EXHAUST PLUGS (set of 2)
HEAT EXCHANGER EXHAUST PLUG (on right side, forward of main gear)
FADEC PLUGS (C-130J model) (set of 8)
CARGO COMPARTMENT A/C INLET PLUG
CARGO COMPARTMENT A/C INLET/EXHAUST PLUGS: H, J, T, P & U models, NSN 1730-01-530-6758 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2)
CARGO COMPARTMENT A/C INLET/EXHAUST PLUGS (set of 2)
MAIN ENGINE INLET PLUGS (set of 4)
MAIN ENGINE INLET PLUGS (H, J, T, P & U models) (set of 4)
MAIN ENGINE INLET PLUGS, heavy duty type, NSN 1730-01-530-6759 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4)
EXHAUST PLUGS (set of 4)
EXHAUST PLUGS (J Models) (set of 4)
OIL COOLER INLET PLUGS (set of 4)
OIL COOLER INLET PLUGS (J, T, P & U models) (set of 4)
OIL COOLER INLET PLUGS, (H, J, P, T & U models), heavy duty type (set of 4)
OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-530-6760 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4)
RADAR COOLING INLET PLUG
PROP TIP PILLOWS (set of 2)
Prop Tie-Down/Exhaust Covers are made of heavy duty red vinyl material. Thick nylon webbing runs from the exhaust covers to the prop boot. This webbing is adjustable with plastic buckles, and is held tight with a steel spring where it attaches to the prop boot.... read more
PROP TIP PILLOWS w/Prop Arc Streamer (set of 4)
PROP TIP PILLOWS w/Edge Protectors (set of 2)
HP-1 PITOT COVERS (one each side) (set of 2)
Pitot Tube Covers, made of Naugahyde vinyl, are designed to cover the entire pitot assembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove before flight" streamer is attached to the cover. Non-burning Pitot Covers are designed to withstand more than 500Â° Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitot cover attached.... read more
HP-1 PITOT COVERS (two each side) (set of 4)
PITOT COVERS (Large Pitot Tubes) (one each side) (set of 2)
PITOT COVER SET (H & J-models, 92 & Up, Larger Pitot) (set of 4)
PLUG SET STORAGE BAG, w/ a/c tail number & squadron insignia imprint in full color
PLUG SET STORAGE BAG, no artwork
HORIZONTAL STABILIZER COVERS, padded for hail protection, ALL YEAR USE (set of 2)
Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire upper surface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure under each stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate for static wicks. Horizontal Stabilizer Covers for winter use or long-term all year use are usually available, and are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporates dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more
HAIL PROTECTION COVERS: GENERAL DESCRIPTION
Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more
NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.
FLIGHT DECK HEATSHIELD SET (standard models) (set of 13)
Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than 1/8" thick, the Reflector can fold up flat and store in a sleeve, yet is stiff enough when flat to stand up against the windshield using the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields are an excellent short-term remedy for cockpit overheating, but use the Canopy Cover for more effective and practical long term protection.... read more
FLIGHT DECK HEATSHIELD SET (models modified with missile sensors) (set of 11)
FLIGHT DECK HEATSHIELD SET (windshields & skylights) (set of 5)
CABIN HEATSHIELD SET (10 cabin windows, 2 scanner windows, 2 troop door windows) (set of 14)
CABIN HEATSHIELD SET (J Stretch Model: 11 cabin windows, 2 scanner windows, 2 troop door windows) (set of 15)
HEATSHIELD SET, all windows, all models (set of 27)
HEATSHIELD SET, all windows (J Stretch Model) (set of 28)
AUXILIARY FUEL TANK COVER
200 GALLON TANK COVER
185 GALLON TANK COVER, 2 Side-by-Side Config.
185 GALLON TANK COVER, Single Tank Config.
MAINT SEAT COVER, pilot, co-pilot, engineer, priced separately
MAINT SEAT COVER, navigator, priced separately
ONE-MAN SEAT BAG, Stretch Models, includes a/c tail number
TWO-MAN SEAT BAG, Stretch Models, includes a/c tail number
CENTER CONSOLE COVER (standard color: Black), NSN: 1680-01-592-8492
THROTTLE QUADRANT COVER
THROTTLE QUADRANT COVER (J models)
CENTER CONSOLE COVER (J Models, standard color: Black), NSN 1680-01-590-9530
TIRE COVERS (set of 6)
TRAVEL COVER, Light Weight Travel Cockpit/Nose Cover (Windshield, Flight Deck, Nose)
TRAVEL COVER, Light Weight Travel Windshield/Flight Deck Area Cover
Can't find what you're looking for? We probably make it! Our offices are currently closed for Our offices are closed for the weekend.. Send an email to firstname.lastname@example.org with information about your aircraft and the product you are looking for!
photo credit: Photo provided by customerPhoto provided by customer
photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.Bruce's Custom Covers, Aircraft Covers, Inc.
photo credit: Roger Cain PhotographyRoger Cain Photography
CLICK on any small image to enlarge it or CLICK on arrows to view next image
general aviation > multi-engine