JetRanger Bubble, Engine, Rotor Hub & Blade Covers (& Tie-Downs)

JetRanger Bubble, Engine, Rotor Hub & Blade Covers (& Tie-Downs)

Product Images:

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

CLICK on any small image to enlarge it or CLICK on arrows to view next image

Product ID

Product name

Unit Price

close= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.
= Items that have expedited delivery.

Quantity Qty

Cart

Products:
Try Our New Product Filter
×

Only want to see some of our products?

Use the Product Filter Checkbox List to only see the products that interest you.

Section 1: Cockpit/Bubble Covers

5 Products , 24 Photos

505-000

BUBBLE COVER

$865.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... read more

Each Bubble Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely UV reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra lightweight material available for fitted hangar dust covers.... read more

505-001

BUBBLE COVER w/ wire strike

$890.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... read more

Each Bubble Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely UV reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra lightweight material available for fitted hangar dust covers.... read more

505-052

WINDSHIELD COVER, secures to skid

$430.00

 

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Windshield/Nose Cover is designed to cover the windshield and side windows of the cockpit, and extends forward to cover the nose.

505-080

MAIN BODY COVER

$4,065.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).

505-081

MAIN BODY COVER (INSULATED)

$6,170.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Section 2: Engine/Tail Rotor Covers

14 Products , 14 Photos

505-100

ENGINE COVER

$620.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... read more

505-101

INSULATED ENGINE COVER

$970.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Insulated Engine Cover is made with a thicker, quilted, water-repellent, and breathable material that is insulated on the inside. The Insulated Engine Cover works well in cold climates to help with engine preheating.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

505-110

INTAKE COVER, snap-on type

$305.00

 

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Intake Cover. Details vary by model, but generally helicopter intake covers are designed to enclose the intake are only. They are smaller than helicopter engine covers, and their attachment details can vary from straps, to snaps, or some combination of the two. Specific information for each model is available on request.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

505-115

EXHAUST COVER

$195.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... read more

505-120

EXHAUST PLUG

$195.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... read more

505-300

ROTOR HUB COVER

$230.00

 

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... read more

505-310

ROTOR HUB/DRIVE SHAFT COVER

$255.00

 

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... read more

505-315

ROTOR HUB/DRIVE SHAFT COVER, with skirt

$325.00

 

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... read more

505-400

BLADE COVERS (set of 2)

$535.00

 

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Blade Covers are sewn of medium weight Solution-Dyed Polyester. Cut "full" to avoid trim tabs, Blade Covers can be installed from the ground with the aid of lightweight rope which is attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. A small opening at the tip of the cover allows for some air circulation and drainage. For operations in extremely cold weather, the Cold Weather Blade Covers are fitted with full length zippers, and with optional "boots" designed to accept a preheater hose.... read more

505-410

BLADE COVERS (cold weather type) (set of 2)

$720.00

 

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Blade Covers are sewn of medium weight Solution-Dyed Polyester. Cut "full" to avoid trim tabs, Blade Covers can be installed from the ground with the aid of lightweight rope which is attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. A small opening at the tip of the cover allows for some air circulation and drainage. For operations in extremely cold weather, the Cold Weather Blade Covers are fitted with full length zippers, and with optional "boots" designed to accept a preheater hose.... read more

505-415

BLADE COVERS w/ tie-down details (set of 2)

$620.00

 

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Blade Covers are sewn of medium weight Solution-Dyed Polyester. Cut "full" to avoid trim tabs, Blade Covers can be installed from the ground with the aid of lightweight rope which is attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. A small opening at the tip of the cover allows for some air circulation and drainage. For operations in extremely cold weather, the Cold Weather Blade Covers are fitted with full length zippers, and with optional "boots" designed to accept a preheater hose.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

505-500

BLADE TIE-DOWNS, w/ telescoping attachment pole (set of 3)

$355.00

 

Product Description................................................................................................................................

Blade Tie-Downs are "socks" which fit over the blade tip with or without Blade Covers installed. Front blade tie-downs have two lengths of rope or strap which attaches to the front cross tubes on either side of the cabin. The other tie-downs have generous lengths of rope or strap to tie the blades down at any convenient spot.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

505-600

TAIL ROTOR COVER

$170.00

 

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Tail Rotor Cover is a one-piece design which encloses both the blades and their hub, snapping closed along the bottom edge. The tail rotor cover is normally made from Solution-Dyed Polyester.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

505-610

TAIL ROTOR TIE-DOWNS (set of 2)

$115.00

 

Product Description................................................................................................................................

Tail Rotor Tie-Downs are a similar design to the main blade tie-downs. Stout bungee cords attached to the tie-down socks pull the rotor tips back toward the hub, pulling the tail rotor back to a secure position.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Section 3: Plugs & Protection

1 Product , 0 Photos

505-105

SWASH PLATE PLUG

$435.00

 

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your Bell 505 Jet Ranger X intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'Remove Before Flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Section 5: Heatshields & Sun Reflectors

3 Products , 3 Photos

505-900

WINDSHIELD HEATSHIELDS (set of 2)

$275.00

 

Product Description................................................................................................................................

Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than 1/8" thick, the Reflector can fold up flat and store in a sleeve, yet is stiff enough when flat to stand up against the windshield using the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields are an excellent short-term remedy for cockpit overheating, but use the Bubble Cover for more effective and practical long term protection.... read more

505-910

SIDE WINDOW HEATSHIELDS (set of 4)

$300.00

 

Product Description................................................................................................................................

Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than 1/8" thick, the Reflector can fold up flat and store in a sleeve, yet is stiff enough when flat to stand up against the windshield using the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields are an excellent short-term remedy for cockpit overheating, but use the Bubble Cover for more effective and practical long term protection.... read more

505-915

HEATSHIELD SET (set of 6)

$605.00

 

Product Description................................................................................................................................

Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than 1/8" thick, the Reflector can fold up flat and store in a sleeve, yet is stiff enough when flat to stand up against the windshield using the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields are an excellent short-term remedy for cockpit overheating, but use the Bubble Cover for more effective and practical long term protection.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce about this product

Section 8: Light Weight Products: Travel Covers and FlyAway Covers

2 Products , 16 Photos

505-800

TRAVEL COVER, Light Weight Travel Bubble Cover

$690.00

 

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Lightweight Travel Bubble Cover is the same design as our standard bubble cover, but the material used is very lightwieight and will fold up and store in a smaller space.... read more

NOTE: To preserve their light weight, Travel Covers have a soft lining in selected areas only.

505-810

TRAVEL COVER, Light Weight Travel Windshield Cover (secures to skid)

$330.00

 

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The Bell 505 Jet Ranger X Windshield/Nose Cover is designed to cover the windshield and side windows of the cockpit, and extends forward to cover the nose.

Can't find what you're looking for? We probably make it!
Call us at (408)738-3959 or toll-free at (800)777-6405 (U.S. & Canada) Or use our online contact form here.