Product ID

Product name

Unit Price

close= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.
= Items that have expedited delivery.

Quantity Qty

Cart

Products:
Try Our New Product Filter
×

Only want to see some of our products?

Use the Product Filter Checkbox List to only see the products that interest you.

Section 1: Canopy/Cockpit/Fuselage Covers

2 Products, 1 Photo

TS11-000

CANOPY COVER

$620.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Iskra TS-11 Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

TS11-010

CANOPY/NOSE COVER

$815.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $30 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Canopy/Nose Cover combines a Canopy Cover and a Nose cover. The Iskra TS-11 Canopy Cover is designed to enclose the windshield, all side windows, canopy roof, and extend forward to cover the nose. It is a one-piece cover. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 3: Plugs & Protection

4 Products, 0 Photos

TS11-100

INTAKE PLUGS (set of 2)

$300.00

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your Iskra TS-11 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

TS11-200

PITOT COVERS (set of 2)

$75.00

Product Options & Information..............................................................................................................

  • This item comes in red only.

Product Description................................................................................................................................

The Iskra TS-11 Pitot Tube Covers, made of Naugahyde vinyl, are designed to cover the entire pitot assembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove before flight" streamer is attached to the cover. Heat Resistant Pitot Covers are designed to withstand more than 500 ° Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitot cover attached.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

TS11-210

PITOT COVER

$60.00

Product Options & Information..............................................................................................................

  • This item comes in red only.

Product Description................................................................................................................................

The Iskra TS-11 Pitot Tube Covers, made of Naugahyde vinyl, are designed to cover the entire pitot assembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove before flight" streamer is attached to the cover. Heat Resistant Pitot Covers are designed to withstand more than 500 ° Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitot cover attached.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

TS11-300

EXHAUST PLUG

$175.00

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your Iskra TS-11 exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 4: Wing/Tail/Empennage Covers

1 Product, 0 Photos

TS11-400

WING COVERS, also covers intakes (set of 2)

$1,565.00

Product Options & Information..............................................................................................................

  • This item is available in Silver, Red, or Black. Standard is
    Silver. Other colors may be available
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).

Product Description................................................................................................................................

The Iskra TS-11 Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 7: Light Weight Products: Travel Covers and FlyAway Covers

2 Products, 0 Photos

TS11-800

TRAVEL COVER, Light Weight Canopy Cover

$495.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Iskra TS-11 Lightweight Travel Canopy Cover will cover the same area as our standard Canopy Cover, but the material used is very lightwieight and will fold up and store in a much smaller space. This cover is ideal for the airplane that is hangered full time and only needs a cover on rare occasions.... read more

Travel Covers are made with Silver Solution-Dyed Polyester fabric and only lined over the windshield to save weight. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... read more

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

TS11-805

TRAVEL COVER, Light Weight Travel Canopy/Nose Cover

$650.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $20 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Can't find what you're looking for? We probably make it!
Our offices are currently closed for Our offices are closed for the weekend.. Send an email to bruce@aircraftcovers.com with information about your aircraft and the product you are looking for!