Zenith 801 Standard Canopy Cover

Zenith 801 Standard Canopy Cover

Product Images:

CLICK on any small image to enlarge it or CLICK on arrows to view next image

Product ID

Product name

Unit Price

Quantity Qty

Bruce's Comment

?

= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.

Cart

Products:

Section 1: Canopy/Cockpit/Fuselage Covers

2 Products , 0 Photos

Z801-000

CANOPY COVER (Over-The-Top Style), Belly Strap Type

$425.00

XBruce's Comments

part no. Z801-000

  • (Z801-000): We may contact you about filling out an antenna location worksheet.

  • (Z801-000): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.



email Bruce about this product

Z801-010

EXTENDED CANOPY COVER (Over-The-Top Style)

$510.00

XBruce's Comments

part no. Z801-010

  • (Z801-010): We may contact you about filling out an antenna location worksheet.

  • (Z801-010): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.



email Bruce about this product
All Canopy/Cockpit/Fuselage/Bubble Covers shown.

Section 2: Plugs & Protection

1 Product , 0 Photos

Z801-105

ENGINE INLET PLUGS (set of 2)

$115.00

XBruce's Comments

part no. Z801-105

  • (Z801-105): This item comes in red only.



email Bruce about this product
All Plugs & Protection shown.

Section 3: Engine/Prop Covers

4 Products , 0 Photos

Z801-100

ENGINE COVER

$325.00

Z801-101

INSULATED ENGINE COVER

$425.00

XBruce's Comments

part no. Z801-101

  • (Z801-101): This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.



email Bruce about this product

Z801-150

PROPELLOR/SPINNER COVER, 2 blade

$150.00

XBruce's Comments

part no. Z801-150

  • (Z801-150): Photos of your aircraft would be helpful. We may contact you about that.

  • (Z801-150): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

Z801-155

INSULATED PROPELLOR/SPINNER COVER, 2 blade

$200.00

XBruce's Comments

part no. Z801-155

  • (Z801-155): This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.

  • (Z801-155): Photos of your aircraft would be helpful. We may contact you about that.

  • (Z801-155): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product
All Engine/Blade/Tail Rotor Covers shown.

Section 4: Wing/Tail/Empennage Covers

6 Products , 0 Photos

Z801-200

WING COVERS, WINTER USE (set of 2)

$415.00

XBruce's Comments

part no. Z801-200

  • (Z801-200):



email Bruce about this product

Z801-205

WING COVERS, ALL YEAR USE (set of 2)

$740.00

XBruce's Comments

part no. Z801-205

  • (Z801-205):



email Bruce about this product

Z801-310

HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2)

$125.00

XBruce's Comments

part no. Z801-310

  • (Z801-310):



email Bruce about this product

Z801-315

HORIZONTAL STABILIZER COVERS, ALL YEAR USE (set of 2)

$195.00

XBruce's Comments

part no. Z801-315

  • (Z801-315):



email Bruce about this product

Z801-400

EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), WINTER USE

$495.00

XBruce's Comments

part no. Z801-400

  • (Z801-400): We may contact you about filling out an antenna location worksheet.

  • (Z801-400):

  • (Z801-400): Photos of your aircraft would be helpful. We may contact you about that.

  • (Z801-400): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

Z801-405

EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), ALL YEAR USE

$535.00

XBruce's Comments

part no. Z801-405

  • (Z801-405): We may contact you about filling out an antenna location worksheet.

  • (Z801-405):

  • (Z801-405): Photos of your aircraft would be helpful. We may contact you about that.

  • (Z801-405): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product
5 of 6 Wing/Tail/Empennage Covers shown, CLICK TO SEE ALL

Section 5: Light Weight Products: Travel Covers and FlyAway Covers

1 Product , 0 Photos

Z801-800

TRAVEL COVER, Light Weight Travel Canopy Cover

$340.00

XBruce's Comments

part no. Z801-800

  • (Z801-800): We may contact you about filling out an antenna location worksheet.

  • (Z801-800): Photos of your aircraft would be helpful. We may contact you about that.



email Bruce about this product
All Fly-Away Products shown.

Can't find what you're looking for? We probably make it!
Our offices are currently closed for Our offices are closed for another 6.6 hours.. Send an email to bruce@aircraftcovers.com with information about your aircraft and the product you are looking for!

Product Descriptions:

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.

The Zenith Zenair 801 Canopy Cover is custom designed and fit for each model as well as your aircraft's specific antenna and possible temperature probe placements. The Canopy Cover is designed to enclose the windshield, side and rear window area. The Canopy Cover is a one-piece design, which wraps around the canopy and closes with Velcro behind the pilot's side door. The Velcro closure allows entry to the airplane without removing the entire cover. The Canopy Cover also attaches by two belly straps, one under the engine cowling and one under the tailboom. Belly straps are adjustable and detachable from either side using heavy-duty quick release plastic buckles. The buckles are padded to prevent scratching. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, etc.... read more

Each Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers.... read more

Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance, and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice, and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra-lightweight material available for fitted hangar dust covers.... read more

The Extended Canopy Cover (Over The Top Style takes our standard over the top Canopy Cover design extends it down to the main wheel struts to cover the entire side of the airplane throughout the length of the cover.

Engine Inlet Plugs are custom fit for your Zenith Zenair 801 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have warning flags that are visible from the cockpit or 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs..... read more

Engine Covers will cinch around or behind the spinner, cover the entire engine cowl area including the engine air cooling and induction air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling. The Engine Cover is attached with a belly strap aft of the firewall, and can Velcro to the Canopy Cover. Engine Covers are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. An Insulated version of the engine cover can be made with a thicker, quilted, and water-repellent material. The Insulated Engine Cover works well in cold climates to help with engine preheating.... read more

The Zenith Zenair 801 Insulated Engine Cover is made with a thicker, quilted, water-repellent, and breathable material that is insulated on the inside. The Insulated Engine Cover works well in cold climates to help with engine preheating. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air cooling and induction air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling. The Insulated Engine Cover is attached with a belly strap aft of the firewall, and can Velcro to the Canopy Cover if desired.... read more

The Zenith Zenair 801 Propeller Cover is a one-piece design that form fits to the blades and spinner. The prop cover slips over the blades and spinner and is attached by a plastic all-weather zipper on the bottom of the blades. Propeller covers can be made for multiple numbers of blades, and for wooden, composite or metal props. The Propeller Cover is normally made from Acrylic Sunbrella or Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Insulated Propeller Covers works well in cold climates to help with engine preheating. These insulated versions are made with a thicker, quilted, water-repellent, and breathable material.... read more

The Zenith Zenair 801 Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire upper surface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure under each stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate for static wicks. Horizontal Stabilizer Covers for winter use or long-term all year use are usually available, and are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporates dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

The Zenith Zenair 801 Empennage Cover is a complete, one-piece cover which covers both the vertical and horizontal stabilizers, as well as the tailboom. It is normally made from Solution-Dyed Polyester or Acrylic Sunbrella. The cover attaches with Velcro to the aft edge of the Extended Canopy Cover and with adjustable straps underneath the belly. The cover is pulled back over the vertical stabilizer and a plastic all-weather zipper is closed at the trailing edge of the rudder. The cover is then stretched over the elevators and zippered closed along the bottom outboard elevator surfaces. The covers cinch under the horizontal stabilizers using adjustable straps. All antennas, beacons and static wicks, if applicable, are accounted for in the design.... read more

The Lightweight Travel Canopy Cover will cover the same area as our standard Canopy Cover, but the material used is very lightweight and will fold up and store in a much smaller space. This cover is ideal for the airplane that is stored in a hangar full-time and only needs a cover on rare occasions.

Can't find what you're looking for? We probably make it!
Our offices are currently closed for Our offices are closed for another 6.6 hours.. Send an email to bruce@aircraftcovers.com with information about your aircraft and the product you are looking for!