Standard Canopy Cover & Engine Plugs (Cessna 421C shown)

Standard Canopy Cover & Engine Plugs (Cessna 421C shown)

Product Images:

CLICK on any small image to enlarge it or CLICK on arrows to view next image

Product ID

Product name

Unit Price

Quantity Qty

Bruce's Comment

?

= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.

Cart

Products:

Section 1: Canopy/Cockpit/Fuselage Covers

5 Products , 2 Photos

441-000

CANOPY COVER

$795.00

XProduct Photos

part no. 441-000

  • (441-000): We may contact you about filling out an antenna location worksheet.

  • (441-000): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Standard Canopy Cover & Engine Plugs (Cessna 421C shown)



email Bruce about this product

441-001

CANOPY/NOSE COVER

$950.00

XBruce's Comments

part no. 441-001

  • (441-001): We may contact you about filling out an antenna location worksheet.

  • (441-001): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.



email Bruce about this product

441-010

COCKPIT COVER

$525.00

XProduct Photos

part no. 441-010

  • (441-010): We may contact you about filling out an antenna location worksheet.

  • (441-010): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

Windshield Cover, Engine Plugs, Prop Tie/Exhaust Covers (Cessna 425 shown)



email Bruce about this product

441-020

COCKPIT/NOSE COVER

$725.00

XBruce's Comments

part no. 441-020

  • (441-020): We may contact you about filling out an antenna location worksheet.

  • (441-020): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.



email Bruce about this product

441-025

NOSE COVER

$250.00

XBruce's Comments

part no. 441-025

  • (441-025): We may contact you about filling out an antenna location worksheet.

  • (441-025): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.



email Bruce about this product
All Canopy/Cockpit/Fuselage/Bubble Covers shown.

Section 2: Plugs & Protection

7 Products , 4 Photos

441-100

ENGINE INLET PLUGS (set of 2)

$220.00

XProduct Photos

part no. 441-100

  • (441-100): This item comes in red only.

Windshield Cover, Engine Plugs, Prop Tie/Exhaust Covers (Cessna 425 shown)



email Bruce about this product

441-110

INTERCOOLER ACM INLET PLUGS (set of 2)

$120.00

XBruce's Comments

part no. 441-110

  • (441-110): This item comes in red only.



email Bruce about this product

441-130

EXHAUST PLUGS (set of 2)

$215.00

XBruce's Comments

part no. 441-130

  • (441-130): This item comes in red only.

  • (441-130): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

441-140

HEATER INLET PLUG (ON NOSE)

$65.00

XBruce's Comments

part no. 441-140

  • (441-140): This item comes in red only.



email Bruce about this product

441-150

PITOT COVERS & HEATER INLET PLUG SET (set of 3)

$95.00

XProduct Photos

part no. 441-150

  • (441-150): This item comes in red only.

Cessna 421 PItot Covers set



email Bruce about this product

441-HP1

PITOT COVERS (set of 2)

$50.00

XProduct Photos

part no. 441-HP1

  • (441-HP1): This item comes in red only.

Cessna 421 PItot Covers set



email Bruce about this product

441-HP1A

PITOT COVERS "REMOVE CONTROL LOCKS BEFORE TOWING" (set of 2)

$50.00

XProduct Photos

part no. 441-HP1A

  • (441-HP1A): This item comes in red only.

Cessna 421 PItot Covers set



email Bruce about this product
5 of 7 Plugs & Protection shown, CLICK TO SEE ALL

Section 3: Engine/Prop Covers

8 Products , 2 Photos

441-112

ENGINE COVERS (set of 2)

$550.00

XBruce's Comments

part no. 441-112

  • (441-112): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

  • (441-112): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

441-115

INSULATED ENGINE COVERS (set of 2)

$850.00

XProduct Photos

part no. 441-115

  • (441-115): This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.

  • (441-115): We are aware of some variation in this item. We may contact you about that.

Cessna 421 Insulated Engine Covers

Cessna 421 Insulated Engine Covers



email Bruce about this product

441-120

PROP TIE-DOWNS (set of 2)

$255.00

XBruce's Comments

part no. 441-120

  • (441-120): This item comes in red only.



email Bruce about this product

441-124

PROPELLOR/SPINNER COVERS, 3 blade (set of 2)

$530.00

XBruce's Comments

part no. 441-124

  • (441-124): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

  • (441-124): Photos of your aircraft would be helpful. We may contact you about that.

  • (441-124): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

441-125

PROPELLOR/SPINNER COVERS, 4 blade (set of 2)

$630.00

XBruce's Comments

part no. 441-125

  • (441-125): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

  • (441-125): Photos of your aircraft would be helpful. We may contact you about that.

  • (441-125): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

441-126

SPINNER COVERS, 3-blade (set of 2)

$475.00

XBruce's Comments

part no. 441-126

  • (441-126): This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.

  • (441-126): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

441-127

INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2)

$630.00

XBruce's Comments

part no. 441-127

  • (441-127): This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.

  • (441-127): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product

441-128

INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2)

$730.00

XBruce's Comments

part no. 441-128

  • (441-128): This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.

  • (441-128): We are aware of some variation in this item. We may contact you about that.


email Bruce about this product
5 of 8 Engine/Blade/Tail Rotor Covers shown, CLICK TO SEE ALL

Section 4: Wing/Tail/Empennage Covers

10 Products , 0 Photos

441-200

WING COVERS (OUTBOARD OF ENGINE NACELLE), WINTER USE (set of 2)

$625.00

XBruce's Comments

part no. 441-200

  • (441-200):



email Bruce about this product

441-205

WING COVERS (OUTBOARD OF ENGINE NACELLE), ALL YEAR USE (set of 2)

$725.00

XBruce's Comments

part no. 441-205

  • (441-205):



email Bruce about this product

441-210

WING/ENGINE/CENTER SECTION COVERS, WINTER USE (set of 2)

$1,450.00

XBruce's Comments

part no. 441-210

  • (441-210):



email Bruce about this product

441-215

WING/ENGINE/CENTER SECTION COVERS, ALL YEAR USE (set of 2)

$1,550.00

XBruce's Comments

part no. 441-215

  • (441-215):



email Bruce about this product

441-220

WING COVERS (CENTER SECTION ONLY), WINTER USE (set of 2)

$395.00

XBruce's Comments

part no. 441-220

  • (441-220):



email Bruce about this product

441-225

WING COVERS (CENTER SECTION ONLY), ALL YEAR USE (set of 2)

$450.00

XBruce's Comments

part no. 441-225

  • (441-225):



email Bruce about this product

441-300

HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2)

$275.00

XBruce's Comments

part no. 441-300

  • (441-300):



email Bruce about this product

441-305

HORIZONTAL STABILIZER COVERS, ALL YEAR USE (set of 2)

$350.00

XBruce's Comments

part no. 441-305

  • (441-305):



email Bruce about this product

441-320

VERTICAL STABILIZER COVER, WINTER USE

$275.00

XBruce's Comments

part no. 441-320

  • (441-320):



email Bruce about this product

441-325

VERTICAL STABILIZER COVER, ALL YEAR USE

$350.00

XBruce's Comments

part no. 441-325

  • (441-325):



email Bruce about this product
5 of 10 Wing/Tail/Empennage Covers shown, CLICK TO SEE ALL

Section 6: Heatshields & Sun Reflectors

3 Products , 0 Photos

441-910

COCKPIT HEATSHIELDS (set of 6)

$210.00

441-911

CABIN HEATSHIELDS (set of 12)

$275.00

441-912

WINDSHIELD HEATSHIELDS (set of 2)

$165.00

All HeatShields & Sun Reflectors shown.

Can't find what you're looking for? We probably make it!
Our offices are currently closed for Our offices are closed for the day.. Send an email to bruce@aircraftcovers.com with information about your aircraft and the product you are looking for!

Product Descriptions:

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.

The Cessna 441, Conquest II Canopy Cover is custom-designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. .... read more

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

The Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers. Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed these materials especially for aircraft protection. The outer material is medium-weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price. We also have an ultra-lightweight material available for fitted hangar dust covers.... read more

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

The Canopy/Nose Cover combines a Canopy Cover and a Nose cover. The Cessna 441, Conquest II Canopy/Nose Cover is designed to enclose the windshield, all side windows, canopy roof, and also extends forward to cover the nose. It is a one-piece cover. The Canopy/Nose Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements. The Canopy/Nose Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shock cord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.... read more

The Cessna 441, Conquest II Cockpit Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.

Cockpit covers are designed to cover the windshield and side windows of the cockpit. Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. The windshield cover comes with a duffle bag. The N-number can be imprinted onto the cover for an extra charge. The windshield cover and the duffle bag are trimmed in the colors of the aircraft.... read more

Each Cockpit Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please contact us for availability and price.... read more

The Cessna 441, Conquest II Cockpit/Nose Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.

The Cockpit/Nose Cover is designed to cover the windshield and side windows of the cockpit. Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. The windshield cover comes with a duffle bag. The N-number can be imprinted onto the cover for an extra charge. The windshield cover and the duffle bag are trimmed in the colors of the aircraft.... read more

The Cessna 441, Conquest II Nose Cover is designed to cover the section of the fuselage forward of the windshield to the tip of the nose. It is secured with belly straps

Engine Inlet Plugs are custom fit for your Cessna 441, Conquest II intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have warning flags that are visible from the cockpit or 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are embroidered with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs..... read more

Engine Exhaust Plugs are custom fit for your Cessna 441, Conquest II exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... read more

Pitot Tube Covers, made of Naughahyde vinyl, are designed to cover the entire pitot assembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove before flight" streamer is attached to the cover. Non-burning Pitot Covers are designed to withstand more than 500° Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitot cover attached.... read more

Engine Covers will cinch around or behind the spinner, cover the entire engine cowl area including the engine air cooling and induction air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling. The Engine Cover is attached with a belly strap aft of the firewall, and can Velcro to the Canopy Cover. Engine Covers are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. An Insulated version of the engine cover can be made with a thicker, quilted, and water-repellent material. The Insulated Engine Cover works well in cold climates to help with engine preheating.... read more

The Cessna 441, Conquest II Insulated Engine Cover is made with a thicker, quilted, water-repellent, and breathable material that is insulated on the inside. The Insulated Engine Cover works well in cold climates to help with engine preheating. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air cooling and induction air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling. The Insulated Engine Cover is attached with a belly strap aft of the firewall, and can Velcro to the Canopy Cover if desired.... read more

The Cessna 441, Conquest II Propeller Cover is a one-piece design that form fits to the blades and spinner. The prop cover slips over the blades and spinner and is attached by a plastic all-weather zipper on the bottom of the blades. Propeller covers can be made for multiple numbers of blades, and for wooden, composite or metal props. The Propeller Cover is normally made from Acrylic Sunbrella or Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Insulated Propeller Covers works well in cold climates to help with engine preheating. These insulated versions are made with a thicker, quilted, water-repellent, and breathable material.... read more

The Cessna 441, Conquest II Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire upper surface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure under each stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate for static wicks. Horizontal Stabilizer Covers for winter use or long-term all year use are usually available, and are normally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporates dense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfaces against small to medium-size hail.... read more

Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than 1/8" thick, the Reflector can roll up and store in a sleeve, yet is stiff enough when flat to stand up against the windshield using the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields are an excellent short-term remedy for cockpit overheating, but use the Canopy Cover for more effective and practical long term protection. Heatshields should not be used on polarized windows.... read more

Can't find what you're looking for? We probably make it!
Our offices are currently closed for Our offices are closed for the day.. Send an email to bruce@aircraftcovers.com with information about your aircraft and the product you are looking for!