Boeing/Vertol MH-47G: Aircraft Covers from Bruce's Custom Covers

Back to Top

General Cover Details: All covers are imprinted with part number and name, and can also be imprinted with aircraft tail number and/or squadron insignia. Larger covers or cover sets include storage bags, also imprinted with bag's contents (part number & name).

Part Number & Name: M47G-000, WINDSHIELD/SKYLIGHTS COVER (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating, laminated to double-thick brushed tricot knit.
Color: Smoke (dark grey)
Description: Covers the windshield, upper side window and skylight areas. Attaches with heavy straps and side-release buckles at eight points. At the upper corners a strap goes behind the forward pylon. Halfway down the aft edge of the cover another strap goes behind the antenna boxes aft of the cockpit doors. At the lower corners a strap attaches to the dump canister brackets.
Weight: approx. 8 lbs.

Part Number & Name: M47G-010, COCKPIT WINDOWS COVER (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating, laminated to double-thick brushed tricot knit.
Color: Smoke (dark grey)
Description: Covers the windshield, upper and lower side windows, skylights and chin bubble areas. Attaches with heavy straps and side-release buckles at fourteen places. At the upper corners a strap goes behind the forward pylon. Further down the aft edge of the cover another strap goes behind the antenna boxes aft of the cockpit doors. At the lower corners a strap attaches to the dump canister brackets. Along the lower edges on either side the cover attaches with three belly straps.
Weight: approx. 12 lbs.

Part Number & Name: M47G-100, ENGINE NACELLE COVERS (set of 2)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Covers the intake, body and tailcone sections (entire nacelle). Attaches at the intake area with heavy strap and side-release buckle. Closes at the tailcone section with heavy zipper and side-release buckle. Tailcone section is double-thick to guard against excessive wear in this area. Covers are right/left specific.
Weight: approx. 16 lbs.

Part Number & Name: M47G-110, TAILCONE EXHAUST COVERS (set of 2)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Covers the tailcone exhaust. Tightens around the exhaust lip with bungee cord sewn into the edge of the cover, and can be further tightened using a "cordlock" device which tightens the bungee as needed.
Weight: approx. 5 lbs.

Part Number & Name: M47G-200, FLIR TURRET COVER (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Covers the nose-mounted FLIR turret, attaching with a strap around the base of the sensor housing directly in front. Also tightens at the aft edge of the turret mount with Velcro/buckle detail around the cable attachment points.
Weight: approx. 4 lbs.

Part Number & Name: M47G-210, REFUELING PROBE TIP COVER (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Covers the forward 12" section of the refuel probe. Tightens with Velcro straps at base, and has a REMOVE BEFORE FLIGHT streamer at forward tip.
Weight: approx. 1 lb.

Part Number & Name: M47G-220, TFTA EXHAUST COVER (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Covers the entire exhaust nozzle and tightens with a Velcro strap at base.
Weight: approx. 1 lb.

Part Number & Name: M47G-230, FWD PYLON EXHAUST COVERS (snap-on) (set of 2)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Snaps onto existing snap posts at this location. Covers are not right/left specific.
Weight: approx. 3 lbs.

Part Number & Name: M47G-240, FWD PYLON INLET COVER (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Designed to attach to the pylon surface with hooks that go into existing holes.
Weight: approx. 2 lbs.

Part Number & Name: M47G-300, CHAFF DISPENSER COVERS (set of 2)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Slips over chaff dispenser pairs on either side and tightens with bungee and cordlock. Covers are right/left specific.
Weight: approx. 4 lbs.

Part Number & Name: M47G-310, FLARE DISPENSER COVERS (set of 2)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Slips over flare dispenser assembly and secures with Velcro and side-release buckles. Covers are not right/left specific.
Weight: approx. 5 lbs.

Part Number & Name: M47G-320, C-BOX COVER (aft pylon) (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Attaches with hooks that go into existing holes on the aircraft surface.
Weight: approx. 4 lbs.

Part Number & Name: M47G-330, HYDRAULICS COOLING FAN COVER (aft pylon) (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Attaches with hooks that go into existing holes on the aircraft surface.
Weight: approx. 3 lbs.

Part Number & Name: M47G-400, ROTOR HEAD COVERS (set of 2)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Covers the rotor head, rain cap and blade grip areas. Secures under each blade root with Velcro and side release buckles. Additional tightening at base of rain cap with bungee and cordlock details. Additional tightening around blade grip area with Velcro strap.
Weight: approx. 15 lbs.

Part Number & Name: M47G-500, CENTER CONSOLE COVER (1/set)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating
Color: Smoke (dark grey)
Description: Covers center console, nav systems panel and center hand-grip controls. Upper surface has sewn-in padding for extra shock absorption.
Weight: approx. 4 lbs.

Part Number & Name: M47G-510, OBSERVATION WINDOW CARRY BAGS (set of 2)
Material: Dupont Cordura Nylon, 1000D w/1 oz. urethane backcoating, laminated to double-thick brushed tricot knit.
Color: Smoke (dark grey)
Description: Padded carry bags for the two observation window assemblies. Single window assembly is placed in zippered "suitcase" type enclosure with heavy strap carry handles.
Weight: approx. 7 lbs.

Part Number & Name: M47G-900, COCKPIT HEATSHIELD SET (set of 11)
Material: Mylar Laminate: white polyester film/closed cell foam/metallized polyester film, sewn to Dupont Cordura nylon.
Color: Smoke (dark grey)
Description: Reflective and insulating material designed to push in against interior surface of windshield, windows and skylights. One side is reflective white, other side is dark grey. Either side can be used as outer surface.
Weight: approx. 5 lbs.

Part Number & Name: M47G-910, CABIN HEATSHIELD SET (set of 10)
Material: Mylar Laminate: white polyester film/closed cell foam/metallized polyester film, sewn to Dupont Cordura nylon.
Color: Smoke (dark grey)
Description: Reflective and insulating material designed to push in against interior surface of windshield, windows and skylights. One side is reflective white, other side is dark grey. Either side can be used as outer surface.
Weight: approx. 5 lbs.