Boeing/Vertol CH-47: Aircraft Covers from Bruce's Custom Covers

Back to Top

General Cover Details: All covers are imprinted with part number and name, and can also be imprinted with aircraft tail number and/or squadron insignia. Larger covers or cover sets include storage bags, also imprinted with bag's contents (part number & name).

COCKPIT WINDOWS COVER (1/set)
Covers the windshield, upper and lower side windows, skylights and chin bubble areas. Attaches with heavy straps and side-release buckles at fourteen places. At the upper corners a strap goes behind the forward pylon. Further down the aft edge of the cover another strap goes behind the antenna boxes aft of the cockpit doors. At the lower corners a strap attaches to the dump canister brackets. Along the lower edges on either side the cover attaches with three belly straps.

ENGINE NACELLE COVERS (set of 2)
Covers the intake, body and tailcone sections (entire nacelle). Attaches at the intake area with heavy strap and side-release buckle. Closes at the tailcone section with heavy zipper and side-release buckle. Tailcone section is double-thick to guard against excessive wear in this area. Covers are right/left specific.

TAILCONE EXHAUST COVERS (set of 2)
Covers the tailcone exhaust. Tightens around the exhaust lip with bungee cord sewn into the edge of the cover, and can be further tightened using a "cordlock" device which tightens the bungee as needed.

REFUELING PROBE TIP COVER (1/set)
Covers the forward 12" section of the refuel probe. Tightens with Velcro straps at base, and has a REMOVE BEFORE FLIGHT streamer at forward tip.

FWD PYLON EXHAUST COVERS (snap-on) (set of 2)
Snaps onto existing snap posts at this location. Covers are not right/left specific.

FWD PYLON INLET COVER (1/set)
Designed to attach to the pylon surface with hooks that go into existing holes.

CHAFF DISPENSER COVERS (set of 2)
Slips over chaff dispenser pairs on either side and tightens with bungee and cordlock. Covers are right/left specific.

FLARE DISPENSER COVERS (set of 2)
Slips over flare dispenser assembly and secures with Velcro and side-release buckles. Covers are not right/left specific.

C-BOX COVER (aft pylon) (1/set)
Attaches with hooks that go into existing holes on the aircraft surface.

HYDRAULICS COOLING FAN COVER (aft pylon) (1/set)
Attaches with hooks that go into existing holes on the aircraft surface.

ROTOR HEAD COVERS (set of 2)
Covers the rotor head, rain cap and blade grip areas. Secures under each blade root with Velcro and side release buckles. Additional tightening at base of rain cap with bungee and cordlock details. Additional tightening around blade grip area with Velcro strap.

CENTER CONSOLE COVER (1/set)
Covers center console, nav systems panel and center hand-grip controls. Upper surface has sewn-in padding for extra shock absorption.

COCKPIT HEATSHIELD SET (set of 9)
Reflective and insulating material designed to push in against interior surface of windshield, windows and skylights. One side is reflective white, other side is silver. Either side can be used as outer surface.